Incertitudes de mesure sur les résultats des essais de dureté RockwellTOBOLSKI, Ed.Traitement thermique (Paris). 2004, Vol 357, pp 40-45, issn 0041-0950, 6 p.Article

Indentation hardness of biomorphic SiCGUTIERREZ-MORA, F; GORETTA, K. C; VARELA-FERIA, F. M et al.International journal of refractory metals & hard materials. 2005, Vol 23, Num 4-6, pp 369-374, issn 0958-0611, 6 p.Conference Paper

Dureté des corps: Analyse d'autres comportements = Body hardness : analysis of other behavioursFELDER, Eric.Techniques de l'ingénieur. Matériaux métalliques. 2005, Vol MB1, Num M4157, issn 1762-8733, M4157.1-M4157.15, M4158.1-M4158.2 [17 p.]Article

Load dependence of the hardness of silicate glasses: not just due to indenter tip defectsGRAU, P; BERG, G; FRÄNZEL, W et al.Glastechnische Berichte. 1993, Vol 66, Num 12, pp 313-320, issn 0017-1085Article

Analyse par simulation numérique de l'influence du facteur de correction sur les mesures de dureté de matériaux élasto-plastiques en indentation instrumentée : Indentation à différentes échelles = Numerical analysis of the depth-dependent correction factor influence on hardness measurements in indentation testing of elastic-plastic materialsABBES, F; TROYON, M; MEZA, J. M et al.Matériaux et techniques. 2011, Vol 99, Num 2, pp 179-184, issn 0032-6895, 6 p.Article

Determination of true knoop hardnessNEUMANN, J. P.Advanced materials & processes. 2000, Vol 157, Num 1, issn 0882-7958, p. 65Article

Hardness testing of ceramicsQUINN, G. D.Advanced materials & processes. 1998, Vol 154, Num 2, pp 23-27, issn 0882-7958Article

Automatisierte normgerechte Vickers-Härteprüfung = Automated standard Vickers hardness testMEISSNER, J.HTM. Härterei-technische Mitteilungen. 1992, Vol 47, Num 1, pp 49-53, issn 0341-101XArticle

Hardness testing of castingsFoundry management & technology. 1991, Vol 119, Num 9, pp 64-74, issn 0360-8999Article

True Hardness Evaluation of Bulk Metallic Materials in the Presence of Pile Up: Analytical and Enhanced Lobes Method ApproachesCABIBBO, M; RICCI, P.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 1, pp 531-543, issn 1073-5623, 13 p.Article

PREDICTING SENSORY COHESIVENESS, HARDNESS AND SPRINGINESS OF SOLID FOODS FROM INSTRUMENTAL MEASUREMENTSDI MONACO, R; CAVELLA, S; MASI, P et al.Journal of texture studies. 2008, Vol 39, Num 2, pp 129-149, issn 0022-4901, 21 p.Article

Ein Ansatz zur Voruasberechnung der Ultra-Mikrohärte von Salzen = Un progrès dans la détermination de l'ultra-microdureté des sels = Progress in the determination of ultra-microhardness of saltsULRICH, J; KRUSE, M.Chemieingenieurtechnik. 1989, Vol 61, Num 12, pp 962-963, issn 0009-286XArticle

UNIVERSAL HARDNESS TEST TO CHARACTERIZE PM STEELSBOCCHINI, Gian F; RIVOLTA, Barbara; GEROSA, Riccardo et al.International journal of powder metallurgy (1986). 2008, Vol 44, Num 3, pp 77-84, issn 0888-7462, 8 p.Article

World-wide unified scales for the Rockwell hardness test : Aim, work to be done, blocks and indenters to be usedPOLZIN, T. H.Materialprüfung. 1999, Vol 41, Num 4, pp 141-143, issn 0025-5300Article

New standards for hardnessELLIS, R. A.Advanced materials & processes. 1998, Vol 154, Num 2, pp 29-31, issn 0882-7958Article

Testing coatings. II: Hardness testing = Essai de revêtements. II: Essai de duretéATHEY, R. D.European coatings journal. 1992, Num 12, pp 900-903, issn 0930-3847Article

Eignung des Rockwell-C-Eindringkörpers für die Härteprüfung unter Prüfkraft = Valeur du corps de pénétration Rockwell-C pour les essais de dureté sous force d'essai = Suitability of the Rockwell-C penetrating body for the hardness test under testing forceWEILER, W.Materialprüfung. 1988, Vol 30, Num 6, pp 187-188, issn 0025-5300Article

Dureté des matériaux: Influence de l'élasticité = Material hardness : effect of elsticityFELDER, Eric.Techniques de l'ingénieur. Matériaux métalliques. 2005, Vol MB1, Num M4156, issn 1762-8733, M4156.1-M4156.17Article

Inapproximability results for set splitting and satisfiability problems with no mixed clausesGURUSWAMI, V.Lecture notes in computer science. 2000, pp 155-166, issn 0302-9743, isbn 3-540-67996-0Conference Paper

Estructura cristalina, composicion quimica y propiedades fisicas de las gemas. II : La dureza = Crystal structure, chemical composiiton and physical properties of gemmes. II: hardnessSOLANS, J; DOMENECH, M.V.1990, Vol 32, Num 85-86, pp 13-20, issn 0210-2528Article

The hardness of silicon and germaniumVANDEPERRE, L. J; GIULIANI, F; LLOYD, S. J et al.Acta materialia. 2007, Vol 55, Num 18, pp 6307-6315, issn 1359-6454, 9 p.Article

Effects of internal strains on hardness of nanocrystalline Al-Fe-Cr-Ti alloysSHAW, L; LUO, H; VILLEGAS, J et al.Scripta materialia. 2004, Vol 51, Num 5, pp 449-453, issn 1359-6462, 5 p.Article

EFFECT OF PROCESSING CONDITIONS ON INSTRUMENTAL EVALUATION OF NIXTAMAL HARDNESS OF CORNIBARRA-MENDIVIL, M. H; GALLARDO-NAVARRO, Y. T; TORRES, P. I et al.Journal of texture studies. 2008, Vol 39, Num 3, pp 252-266, issn 0022-4901, 15 p.Article

Structure and hardness of selected muscles in young bullsORYL, Barbara.Polish journal of food and nutrition sciences. 2004, Vol 13, Num 1, pp 57-63, issn 1230-0322, 7 p.Article

Mechanische Werkstoffkennwerte bestimmen : Ergebnisse des instrumentierten Eindringversuchs im Makrobereich = Determination of mechanical properties of materials by using the instrumented indentation test within macro regionREIMANN, Erhard.Materialprüfung. 2000, Vol 42, Num 10, pp 411-415, issn 0025-5300Article